LifeSource Health Line (Toll-Free): 1-888-726-9966
E-8
TAKING YOUR BLOOD PRESSURE
NOTE: If you wish to stop inflation at any time, press either START
button again.
NOTE: The maximum cuff pressure is set at 280 mmHg. If it reaches
280 mmHg, the auto exhaust will be triggered and cuff pressure will
deflate to 0.
6. When the inflation is complete, the deflation starts automat-
ically and the ❤ blinks, indicating that the measurement is in
progress. Once the pulse is detected, the symbol flashes with
each pulse beat.
NOTE: If an appropriate pressure is not obtained, the device
automatically starts to inflate again.
7. When the measurement is complete, the systolic
and diastolic pressure readings and pulse rate are
displayed and stored. See Page E-9 for more
details about the memory function.
The cuff deflates and the monitor automatically
shuts off after 60 seconds, or you can turn it off
by pressing either START button.
8. Remove cuff and make note of your blood pressure and pulse
rate on the Blood Pressure Record chart (see Page E-15),
indicating the date and time of measurement.
Additional logbook charts can be downloaded and printed for
free at www.LifeSourceOnline.com. or www.autocontrol.com.