Filter
Top Products
11
Using the Monitor
Symbols that are printed on the cuff
Symbols Function/Meaning Recommended Action
Artery Position Mark
Set the
mark on the artery
of the upper arm or in line with
the ring finger on the inside of
the arm.
▲
Index
REF
Catalog number
Proper fit range for Adult Cuff
It's printed on the Adult Cuff.
Range to use Large Adult Cuff
It's printed on the Adult Cuff.
Use Large Adult Cuff instead of
Adult Cuff.
Proper fit range for Large Adult Cuff
It's printed on the Large Adult Cuff.
Range to use Small Adult Cuff
It's printed on the Adult Cuff.
Use Small Adult Cuff instead of
Adult Cuff.
Proper fit range for Small Adult Cuff
It's printed on the Small Adult Cuff.
Range to use Adult Cuff
It's printed on the Large Adult Cuff
and Small Adult Cuff.
Use Adult Cuff instead of Large
Adult Cuff or Small Adult Cuff.
Lot number
How to Take Proper Measurements
For the most accurate blood pressure measurement:
Sit comfortably at a table. Rest your arm on the table.
Relax for about five to ten minutes before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure right after physical exercise or a bath. Rest for twenty or
thirty minutes before taking the measurement.
Try to measure your blood pressure at the same time every day.
Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed).
After Measurement
After measurement, press the START button to turn the device off. After one
minute of non-operation, the device will turn off automatically.
Remove the cuff and record your data.
Note: Allow at least three minutes between measurements on the same person.