A&D HL-3000WP Scale User Manual


 
1
SAFETY PRECAUTIONS
All safety messages are identified by the following, “WARNING” or
“CAUTION”, of ANSI Z535.4 (American National Standard Institute:
Product Safety Signs and Labels). The meanings are as follows:
WARNING
A potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
A potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
This manual is subject to change without notice at any time to improve the
product.
Product specifications are subject to change without any obligation on the
part of the manufacture.
When using the HL-WP, the following safety precautions should always be
followed.
WARNING Use only the specified AC adapter for the scale. Other
adapters may cause damage (The AC adapter is optional).
Internal service or adjustments to this product should be
performed by a qualified person.
CAUTION Avoid installing the scale in direct sunlight, which may cause
discoloration or malfunctions.
Do not mix the type of batteries. Replace all the batteries at the
same time.
If the scale is not to be used for a long period of time, remove
all batteries from the battery compartment to avoid leakage.
Avoid overloading that could cause damage to the scale.
Avoid using the weighing pan to move the scale, as that could
cause damage to the scale.
When the scale is used with an AC adapter, the scale does not
conform to IP-65 protection.
IP65
Degree of protection against water: Protected against water jets.
Degree of protection against solid foreign objects: Dust-tight.
IP Code (Degree of protection provided by enclosures) of IEC 60529