A&D EJ-200 Scale User Manual


 
19
8-4. Storing weighing units
It is possible to store the weighing units that will be actually used from the units
available. For the units available, see “5-3. Units”.
Select and store the weighing units as described below:
1. Press and hold the SAMPLE key to display
func .
2. Press the SAMPLE key several times to display
Unit .
3. Press the PRINT key.
4. Press the SAMPLE key to display a weighing unit
to be stored.
5. Press the RE-ZERO key to select the weighing unit.
The selected weighing unit is shown with the STABLE
indicator.
At this stage, the weighing unit is not stored in memory.
6. Repeat steps 4. and 5. to store all weighing units to be
used.
7. Press the PRINT key to store the selected weighing
units in memory.
id appears after end .
8. Press the UNITS key to return to the weighing
mode.
Note
When the balance is switched on, it starts with
the unit that was stored first at step 5.
func
Unit
Unit
Press and hold
Unit
end
id
Returns to
the weighing mode
Each pressing switches
the units available in the
order described on 5-3.
To select
Press
several times
To store