A&D EJ-1500 Scale User Manual


 
13
Entering the upper and lower limit values
6. With Cp Hi displayed, press the PRINT key.
Enter the upper limit value using the following keys.
SAMPLE key To select the digit blinking to
change.
RE-ZERO key To set the value of the digit
selected. Hold down the key to
switch the sign “+” and “-“.
(“N” designates a negative
value.)
PRINT key To store the value and proceed to
the next step.
UNITS key To cancel the value and proceed
to the next step.
7. With Cp lo displayed, press the PRINT key.
Enter the lower limit value using the following keys.
SAMPLE key To select the digit blinking to
change.
RE-ZERO key To set the value of the digit
selected. Hold down the key to
switch the sign “+” and “-“ (see
step 6).
PRINT key To store the value and proceed to
the next step.
UNITS key To cancel the value and proceed
to the next step.
8. Press the PRINT key. Unit appears after
end .
9. Press the UNITS key to return to the weighing
mode.
Cp lo
end
000000
Set using the
relevant keys
001230
LO
LO
Unit
Returns to
the weighing mode
To store
Cp Hi
000000
Set using the
relevant keys
HI
001234
HI
To store