Filter
Top Products
English 5
Symbols
Symbols
Function / Meaning Recommended Action
Standby and power on.
Battery installation guide
Direct current
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Measurement is in
progress. Remain as still as
possible.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during the
measurement.
Previous measurements stored in
MEMORY.
Full Battery
The battery power indicator during the
measurement.
Low Battery
The indicator blinks when battery power
is low.
Replace all batteries with
new ones, when the
indicator blinks.
Unstable blood pressure due to
movement during the measurement.
Try the measurement
again. Remain very still
during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
PUL. DISPLAY ERROR
The pulse is not detected correctly.
Fasten the cuff correctly,
and try the measurement
again.
Pairing or unpairing has not been
performed correctly.
Remove and re-insert the
batteries. Try pairing or
unpairing again.
Pairing in progress
Unpairing in progress
Pairing or unpairing complete
SYS
Systolic blood pressure in mmHg
DIA
Diastolic blood pressure in mmHg.
PUL./min
Pulse per minute
EC directive medical device label
R&TTE directive transmitter module label
Manufacturer
REPEC
EU-representative