Filter
Top Products
English 17
Maintenance
Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem
using the troubleshooting instructions, request service from your dealer
or from the A&D service group. The A&D service group will provide
technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the device inspected
every 2 years, to ensure proper functioning and accuracy. This
maintenance recommendation is for European customers only, to comply
with regulatory requirements. Routine inspection and maintenance is not
needed for non-European customers. Please contact either your
authorized dealer or A&D for maintenance.
Technical Data
Type UA-767PBT-Ci
Measurement method Oscillometric measurement
Measurement range Pressure: 20 - 280 mmHg
Pulse: 40 - 200 beats / minute
Measurement accuracy Pressure: ±3 mmHg
Pulse: ±5%
Power supply 4 x 1.5V batteries (LR6, R6P or AA) or
AC adapter (TB-233) (Not included)
Number of measurements
Approx. 450 measurements, when AA Alkaline
batteries are used, with pressure value of 180
mmHg at room temperature of 23°C
Classification Internally powered ME equipment (Supplied by
batteries) /
Class II (Supplied by adapter)
Clinical test According to ANSI / AAMI SP-10 1987
EMC IEC 60601-1-2: 2007
Wireless communication WML-40AH (MITSUMI Electronics Co. Ltd.)
Bluetooth Ver.2.1 Class 1 HDP SSP
Continua certified
Operating conditions +10°C to +40°C / 15%RH to 85 %RH/
800 hPa to1060 hPa
Transport / Storage conditions
-10°C to +60°C / 15%RH to 85 %RH
Dimensions Approx. 147 [W] x 64 [H] x 110 [D] mm
Weight Approx. 300 g, excepting batteries
Applied part Cuff Type BF