Chapter 19 Configuration: VLAN
GS1900 Series User’s Guide
114
Figure 94 Configuration > VLAN > Guest VLAN > Port > Edit
The following table describes the labels in this screen.
19.4 Voice VLAN
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can
classify and schedule network traffic. It is recommended that there be two VLANs on a port - one
for voice, one for data. Before connecting the IP device to the switch, the IP phone should configure
the voice VLAN ID correctly. It should be configured through its own GUI.
Use this screen to view and configure voice VLAN settings.
19.4.1 The Global Screen
Use this screen to configure the global Voice VLAN settings. Click Configuration > VLAN > Voice
VLAN > Global to open this screen.
Table 76 Configuration > VLAN > Guest VLAN > Port > Edit
LABEL DESCRIPTION
Port
Port List Displays the list of port index numbers that are being configured.
State Enable/Disable the guest VLAN feature.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
