Printer Configuration
Changing Printer Settings
56
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
TOOLS Menu
Table 8 • TOOLS MENU
Print
Information
Prints the specified information on the media, if non-continuous media the information
will be displayed on one or more labels (tags, tickets, etc.).
Accepted values:
• SETTINGS—prints the printer configuration
report.
• NETWORK—prints the settings for any print
server that is installed.
• FORMATS—prints the available formats stored
in the printer’s RAM, Flash memory, or optional
memory card.
• IMAGES—prints the available images stored in
the printer’s RAM, Flash memory, or optional
memory card.
• FONTS—prints the available fonts in the printer,
including standard printer fonts plus any optional
fonts. Fonts may be stored in RAM or Flash
memory.
• BARCODES—prints the available bar codes in
the printer. Bar codes may be stored in RAM or
Flash memory.
• ALL—prints the previous six labels.
• SENSOR PROFILE—shows the sensor settings
compared to actual sensor readings. To interpret
the results of the sensor profile, see Sensor Profile
on page 140.
Related ZPL command(s):
Settings: ~WC
Network: ~WL
Sensor profile: ~JG
Others: ^WD
SGD command used: none
Control panel key(s):
Settings and Network: Do one of the following:
• Hold CANCEL during printer power-up.
• Hold FEED + CANCEL for 2 seconds when
the printer is in the Ready state.
Sensor profile: Hold FEED + CANCEL during
printer power-up.
Printer web page:
View and Modify Printer Settings >
Print Listings on Label
