4-15
1
2
3
4
5
6
7
8
9
10
11
Compression damping force
Compression damping force (for fast compression
damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
adjusting bolt in direction (a). To decrease the
compression damping force and thereby soften
the compression damping, turn the adjusting bolt
in direction (b).
TIP
Make sure that the position indicator marks are
aligned when the shock absorber assembly is set
to the standard setting.
Compression damping force (for slow compres-
sion damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
adjusting screw in direction (a). To decrease the
compression damping force and thereby soften
the compression damping, turn the adjusting
screw in direction (b).
1. Compression damping force adjusting bolt (for fast com-
pression damping)
2. Position indicator marks
(a)
(b)
1
1
2
Compression damping setting (for fast com-
pression damping):
Minimum (soft):
2 turn(s) out from the fully turned in position
Standard:
1 turn(s) out from the fully turned in position
Maximum (hard):
Fully turned in
