MV12/6 — Owner’s Manual
Front & Rear Panels 5
q
i
!5
w
!3
!0
er
!1
!4
!2
t
o
y
u
q ST Master Fader
Controls the level of the signal that is sent to the ST
OUT jacks.
w MONO Control
Controls the level of the signal (the monaural signal
that is formed by combining the signals from the
STEREO bus) that is sent to the MONO OUT jack.
e GROUP 1-4 Faders
r TO ST Switch
Controls the level of the GROUP 1-4 signals, and
sends the signals to their respective GROUP
OUTPUT 1-4 jacks.
Also, when the TO ST switch is ON (>), the signals
whose levels are controlled by the GROUP faders are
also sent to the STEREO bus.
t SEND
• AUX1, AUX2 Controls
Controls the individual levels of the AUX1 and
AUX2 signals that are sent to the AUX1 SEND
jack and AUX2 SEND jack.
• EFFECT Control
Controls the level of the EFFECT bus signal that
is sent to the EFFECT SEND jack.
* This control is not related to, and has no affect on the
signal that is sent from the EFFECT bus to the built-in
digital effects.
y RETURN
• AUX1, AUX2 Controls
Controls the levels of the signals (mixed, L with
R) that are sent to the AUX1 and AUX2 buses
from the RETURN L (MONO) and R jacks.
• GROUP/ST Control
Controls the level of the signal that is sent from
the RETURN L(MONO)/R jacks to the GROUP
buses 1-4 and the stereo bus.
• GROUP, ST Select Switches
Sends the signal from the RETURN L(MONO)/R
jacks to GROUP buses 1-4 and the Stereo bus.
When the switch is ON (>), the signal is sent to
its corresponding buses.
* The signal from the RETURN L jack is sent to GROUP
buses 1 and 3, and the signal from the RETURN R
jack is sent to GROUP buses 2 and 4.
* When only the RETURN L(MONO) jack is used, the
same signal is also sent to the STEREO bus L/R and
GROUP buses 1-4.
Master Control Section
