GUARD MODE
1) you can tell robopet
™
to guard his environment by pressing the
guard mode button . Robopet
™
will make a sound to confirm
the command and then sit down.
2) in guard mode, robopet
™
will use his sound sensor and infrared
vision sensors to react to movement and sound nearby.
3) when he detects a disturbance robopet™ will react by standing
up and making a lot of noise. after this display he will sit down
again and continue to guard.
4) guard mode lasts 30 minutes before robopet
™
puts himself into
sleep mode.
5) you can end guard mode at any time by pressing the guard mode
button again. if robopet
™
was disturbed he will let you know with
a sequence of growls and pants. if he was not disturbed he will
simply stand up.
SLEEP MODE
1) sleep mode allows robopet
™
to power down and still keep his
training and programming in memory.
2) press and hold stop / sleep for about 5 seconds to enter sleep
mode. robopet
™
will sit down and make a noise.
3) in sleep mode, robopet
™
will not respond to any controller
buttons apart from the wake up command.
4) to wake robopet
™
up, press and hold the stop / sleep button for
about 5 seconds.
5) If Robopet™ does not receive any commands for about 10 minutes,
he will enter Sleep Mode (a battery saving shut-down function).
Advanced Operation
9
