Safety 13
MAN0571 (Rev. 6/15//2007)
SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!
Check for leaks with cardboard; never use hand.
Before loosening fittings: lower load, release pressure, and
be sure oil is cool.
Consult physician immediately if skin penetration occurs.
WARNING
19924-B
14 - PN 19924
13 - PN 1004991
TRANSPORT LOCK
AND CYLINDER
REQUIREMENTS
1004991
TRANSPORT
LOCK
WARNING
RAISED CUTTER CAN DROP AND CRUSH
rs must be e
ui
ed with trans
ort lock
Cutt
n
ansport components must be functional, kept in
oodAll t
Blocking up prevents cutter dropping from hydraulic leak down,
hydraulic system failures, or mechanical component failures.
FAILURE TO FOLLOW INSTRUCTIONS CAN
RESULT IN SERIOUS INJURY OR DEATH.
28-1/4"
SINGLE-ACTING FULL
EXTENSION
16 - PN 33347
18 - PN 24611
SLOW MOVING
10 - PN 1002940 AMBER FRONT REFLECTOR 9"
11 - PN 57123 RED REAR REFLECTOR 9"
12 - PN 1004114
If shaft connection is visible, shield
is missing. Replace shield before
operating equipment.
DANGNGERER
1004114
15a - PN 57840
540 RPM
-OR-
15b - PN 57841
1000 RPM
CONTACT WITH ROTATING PARTS
CAN CAUSE SERIOUS INJURY.
WARNING
15502--B
ROTATING COMPONENTS
Do not operate without cover in place.
Look and listen for rotation. Do not
open cover until all components have
stopped.
VEHICLE EMBLEM
17 - PN 15502
