SQUEEGEE ASSEMBLY
Before and during use of machine, use a damp cloth to wipe
the outside and inside
of
squeegee to remove buildup of for
-
eign material
on
the squeegee blades. This prevents streaking
and residue
on
the floor.
Squeegee wear:
After extended use, the squeegee blades will wear. To im
-
prove squeegee performance and extend wear, proceed as
follows:
1.
Turn
off
all switches and place the machine
on
a level surface. Raise the squeegee to
the transport position.
Loosen knobs
on
the left and right hand
sides
of
squeegee until squeegee can be
removed from the squeegee bracket.
Loosen the fasteners
on
front of squeegee
to replace or adjust front blade.
Unlatch rear squeegee latch to replace rear blade.
2.
3.
4.
Adjusting Squeegee Assembly
ber
-t
knob
1.
2.
Lower the squeegee and move the machine
forward.
Observe the level of the squeegee for an
even curl along the length of the blade. Use
camber adjustment knob to achieve even curl if
required.
Adjust the down pressure nut located
on
squeegee
mounting assembly.
Do not apply excessive force.
3.
MAINTENANCE
SQUEEGEE DEFLECTION
INCORRECT
NOTENOUGH
TOO
MUCH
TCPOE
98447 7/1/97
