Using your freezer
Adjusting the temperature control...
1 Turn control to higher number for colder temper-
atures.
2 Turn to lower number for less cold temperatures
Cooling freezer first...
1 Allow freezer to cool 6 to 8 hours before filling with
frozen food.
2 Let it cool overnight before adding large amount
of unfrozen food.
Note: When freezer is frrst started, the compressor
WIII run constantly until the cabrnet IS cooled It may
take up to 6 to 8 hours or longer, depending on room
temperature and the number of times the freezer
door IS opened
After the cabinet IS cooled, the compressor will
turn ON and OFF as needed to keep the freezer at
the proper temperature
Setting the temperature control...
To start, turn control to the middle of the dial Thus
setting is designed to maintain the temperature at
or near O’F ( 17 8 ‘C) under normal operating
conditions.
The Power Saving Control...
operates electric heaters These heaters help pre-
vent moisture from forming on the outsrde of the
freezer when humidrty IS hrgh
1 Use the OFF setting when humidity IS low
2 Use the ON setting only if moisture forms on the
outslde of the freezer
Changing the light bulb...
Adjusting the basket shelf...
To remove basket shelf:
1. Remove food from basket
2. Slide basket straight out to stop.
3. Lift front.
4. Slide the rest of the way out
To replace basket shelf:
1. Fit back of basket shelf on top of guide stops on
bottom of guides.
2. Lift front, then slide the basket until it clears the
guide stops.
Unplug the freezer first.
1 Remove the lrght shield from the side of the control
panel Depress the back of the shreld to release the
tabs, then pull away
2 Replace bulb wrth a 40.watt applrance bulb
3 Replace the lrght shield Insert the shield tabs in the
slots, then press the shield to snap Into place
