Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator Glass shelves are strong enough to
hold bottles, milk and other heavy food (terns
G/cm shelves ore
heavy Be
careful
Moving the meat pan.. .
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan first
I
To remove glass shelves:
1 Tilt up at front.
2 Lift up at back.
3 Pull shelf straight out
To replace:
I. Gurde the rear hooks into the slots In the shelf
supports
2 Tilt up front of shelf until hooks drop into slot Lower
front of shelf to level positron
Removing:
1 Slrde the meat pan out to stop
2 Lrft the front of meat pan
3 Slrde pan the rest of the way out
4 Tilt cover up at front
5 Lrft up at back.
6 Pull strarght out
Replaclng:
1 Guide the rear hooks Into the slots In the shelf
supports.
2 Tilt up front of cover untrl rear hooks drop Into slots.
Lower front of cover to level positron
3 Replace meat pan In reverse order.
Removing the crispers and crisper covers...
Removing crispers:
? Skde cnspers stratght out to stop
2
Lift
the front
3 Slrde the rest of the way out
4 Replace in reverse order
the Cover.
Removing covers:
Covers are held In by two pegs at the back and tâ*L
notched tabs in front
1 Press front out of wav
t ~?ecessar~~. the center leg can be made shorter or
2 Lift cover front
orjger to help level the crisper covers Turn the leg
3 Loft back out of pegs
clxkwnlse to make
I+
longerTurn the leg counterclock-
4 Replace In reverse order
w se ts shorten it
Adjusting the door bins...
support slot
The 4 door bins are adystable to meet your Storage
needs
To remove door bins:
I. Lift front of bin slightly.
2 Slide bin out of support slot
3. Replace in reverse order
Removing the freezer shelf...
â Loft front slightly
2 Loft back off supports
.3 Replace In reverse order
litt the Front
Then the Back
