Using your refrigerator
Power Saving Control
Setting the controls.. .
Controls for the refrigerator and freezer ore In the
refrrgerotor. When the refrigerator is plugged In for
the first time
1 Set the REFRIGERA-
TOR CONTROL to 3
2 Set the FREEZER
CONTROL tc B
Changing the control settings.. .
If you need to adjust temperatures In refrigerator
or freezer, use the settings listed In the chart below
CONDITION:
If Refrigerator
Section IS
TOO WARM
If Freezer
Section IS
TOO WARM
QUESTIONS?
call your
If Refngerata
COOL-LINE ’ Sectlon ,s
service
TOO COLD
assistance
telephone
If ICE Isn’t
number
MADE FAST ENOUGH
Glve the refrigerator time to cool down com-
pletely before adding food.
(This may take sev-
eral hours,]
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
juice IS as cold as you like and when ice cream
1s firm
l
Adjust the Refrrgerator Control first.
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control, if needed.
REASONS:
Door opened often
Large amount of food odded
Room temperature too worm
Door opened often
Large amount of food added
Very cold rcom temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
RECOMMENDED CONTROL
SETTINGS:
Refrigerator
4
Freezer
C
Refrigerator
3
Freezer A
Refrigerator
Freezer
2
0
Heavy Ice usage
Refrigerator
3
Very cold room temperature
Freezer
A
(wge 11 I
If BOTH SECTIONS
Door opened often
Refrigerator
4
ore TOO WARM
Large amount of food added
Freezer B
Very worm 01 very cold
room temperotures
Power Saving Control.. .
The
Power Saving Control
on the Control Con
sole operates electric heaters around the door
openings These heaters help keep moisture from
forming on the outside of the refrigerator
4m
Use the ‘CONSUMES LESS ENERGY” setting <when
humidrty IS low
2 Use the ‘REDUCES EXTERIOR MOISTURE” setting
only if moisture forms on the outside of the
refrigerator
