
Solving common ice maker/dispenser
problems
PROBLEM CAUSE
SOLUTIONS
Ice dispenser l Freezer door open
l Close the freezer door.
won’t work
l Ice bin not properly
l Make sure bin is pushed in all the way.
installed
. Wrong ice in bin l Use only crescents from ice maker.
Shake the bin occasionally to keep cubes
separated and to increase storage room.
. Dispenser not used for
l Dump old ice and make a new supply.
extended periods,
causing ice cubes to
melt together
Ice dispenser
l Ice dispenser bar held l Wait about 3 minutes for the dispenser
stops working in too long motor to reset.
l Large amounts of ice should be taken from
the bin, not through the dispenser.
Off-taste or
odor in ice
l Ice attracts airborne l Dump old ice and make a new supply.
odors; old ice Store excess ice in covered container.
l Water quality
. Water containing minerals (such as sulfur)
may require a fitter to remove.
l Foods not properly l Wrap properly. See pages 26 and 27.
wrapped
l Ice bin and freezer may l Clean freezer and ice bin. See cleaning
need cleaning chart on pages 23 and 24.
l Plumbing to ice maker
l Follow Installation Instructions for proper
ice maker water supply hook up. (See
back of refrigerator cabinet.)
l New ice maker
l The first few loads of ice from a new ice
maker may have an off-taste. Dump ice
and make a new supply.
19