– 13 –
Power Level Indicator •
When lit, indicates the power level
can be changed.
1. Displays roast power level when in the Roast mode (Roast Button indicator is lit).
2. Displays hold mode power level when in the hold mode (Hold Button indicator is lit).
Gentle Bake Button • Use when cooking delicate product, such as strudel, muffins, cupcakes,
meringue pies, etc., to keep product from forming waves on the top. Toggles between the selection
of gentle bake mode and no gentle bake mode.
Gentle Bake Mode • The Gentle Bake button is lit to indicate you are in Gentle Bake mode.
1. The fan cycles with the heat while in the roast mode and timing product at the power level selected
for the roast mode. For instance, ON 15 seconds, OFF 15 seconds at 50% power; On 6 seconds,
OFF 14 seconds at 20% power.
2. The fan stays on while the heat cycles in hold at the power setting selected for the hold mode.
3. The fan stays on while heat cycles at 100% power when not timing.
4. Can be switched at any time.
Not in Gentle Bake Mode • The Gentle Bake button is not lit.
1. Fan stays on while the heat cycles while in the Roast mode and timing product at the power level
selected for roast mode.
2. Fan stays on while heat cycles in Hold at the power setting selected for the hold mode.
3. Fan stays on while heat cycles at 100% power when not timing.
4. Can be switched at any time.
Stop / Start Button • Press once to start the timer when cooking a product if a cook time has been
set. Press a second time to stop the timer after it has been started.
Hold Button • Press to select Hold mode and to specify a hold temperature. The Hold button is lit
to indicate you are in Hold mode. Blank temperature ---°F
(---°C) indicates there is no hold mode.
1.
When not timing, allows setting / enabling a hold mode setting of ---°F
(---°C), meaning no hold
will take effect.
2. Any other temperature means that when the actual cook time has ended, the oven will enter the Hold
mode and use the hold temperature.
Two-Speed Fan Switch • Adjusts air velocity in the oven.
Light Switch • Turns lights in the oven on or off.
Master Switch • Turns oven control circuits ON or OFF; OVEN COOL allows the fan motor to run with
the doors ajar to speed oven cooling.
BEFORE FIRST USE
Before using the oven for the first time, it must be "burned in" to release any odors that might result from
heating the new surfaces in the chamber.
1. Using a clean damp cloth, wipe the inside of the oven, including the racks.
2. Close the oven doors, push the Master Switch to the ON position, turn the Thermostat to 300°F
(149°C) and allow the oven to cycle for 6 to 8 hours before pushing the Master Switch to OFF.
