Vulcan Materials MG36 ML-52522 Manual

A SERVICE OF

next previous

– 9 –

Fig. 4

3. If pilot fails to light, turn main gas supply OFF. Wait 5 minutes and repeat the above procedures.

4. Turn one open top burner valve ON to remove air from the gas line. Turn burner OFF when gas

begins to flow.

Open Top Burner Adjustments

Tools Required: Standard flat blade screwdriver.

1. After pilot is lit, turn open top burners ON.

2. Adjust burner flame, if necessary, by rotating the adjustment screw of the pilot valve located on the

manifold pipe (see Fig. 1). Rotate the screw clockwise to decrease and counterclockwise to

increase the flame.

Nightly Shutdown: Turn burner valve OFF; pilot will remain lit.

Complete Shutdown: Turn burner valve OFF; pilot will remain lit. Turn main gas supply OFF; pilot

goes out.