www.vikingtechnology.com
5.1 ATA Commands
Table 5-1: Supported ATA Commands
Description
Description
Check power mode E5h Security Disable Password F6h
Data Set management 06h Security Erase Prepare F3h
DCO B1h Security Erase Unit F4h
Download Microcode PIO 92h Security Freeze Lock F5h
Download Microcode DMA 93h Security Set Password F1h
Execute drive diagnostic 90h Security Unlock F2h
Flush cache E7h Seek 70h
Flush cache Ext EAh Set features EFh
Identify device ECh Set Max Address F9h
Idle E3h Set Max Address Ext 37h
Idle immediate E1h Set multiple mode C6h
Initialize drive parameters 91h Sleep E6h
Read buffer E4h Smart B0h
Read DMA (w/o retry) C9h Standby E2h
Read DMA (w/retry) C8h Standby immediate E0h
Read DMA Ext 25h Write buffer E8h
Read FPDMA QUEUED 60h Write DMA (w/o retry) CBh
Read Log Ext 2Fh Write DMA (w/retry) CAh
Read multiple C4h Write DMA Ext 35h
Read multiple Ext 29h Write DMA FUA Ext 3Dh
Read native max address F8h Write FPDMA QUEUED 61h
Read native max Ext 27h Write Log Ext 3Fh
Read sector(s) (w/o retry) 21h Write multiple C5h
Read sector(s) (w/retry) 20h Write multiple Ext 39h
Read sector(s) Ext 24h Write multiple FUA Ext CEh
Read Verify Ext 42h Write sector(s) (w/o retry) 31h
Read verify sector(s) (w/o retry) 41h Write sector(s) (w/retry) 30h
Read verify sector(s) (w/retry) 40h Write sector(s) Ext 34h
Recalibrate 10h Write uncorrectable 45h
