TL-R460 Cable/DSL Router User Guide
56
Figure 4-52
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.
4.11.1 Time
Choose menu “System Tools→Time”, you can configure the time on the screen (shown
in Figure 4-53).
Figure 4-53
¾ Time Zone - Select your local time zone from this pull down list.
¾ Date - Enter your local date in MM/DD/YY into the right blanks.
¾ Time - Enter your local time in HH/MM/SS into the right blanks.
¾ Using Daylight Saving Time - Select this option if you want use Daylight Saving
Time (DST), and configure the DST begin time and end time below.
¾ Primary NTP Server & Secondary NTP Server - Enter the address for the NTP
Server, then the Router will get the time from the Primary NTP Server firstly. In
addition, the Router built-in some common NTP Servers, so it can get time
