TD-W8961NB 300Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
6
POWER: The Power plug is where you will connect the power adapter.
ON/OFF: The switch for the power.
WPS: The switch for the WPS function. For details, please refer to 4.3.3.1 Wireless-WPS
Settings.
RESET: There are two ways to reset the modem router 's factory defaults.
Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 5 seconds. And the modem router will reboot to its factory default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the modem
router's Web-based Utility.
WiFi: The switch for the WiFi function.
1, 2, 3, 4 (LAN): Through the port, you can connect the modem router to your PC or the other
Ethernet network devices.
ADSL: Through the port, you can connect the modem router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to 2.4 Connecting the
Modem Router.
Antennas: Used for wireless operation and data transmit.
2.3 Installation Environment
The Product should not be located where it will be exposed to moisture or excessive heat.
Place the modem router in a location where it can be connected to the various devices as
well as to a power source.
Make sure the cables and power cord are safely placed out of the way so they do not create a
tripping hazard.
The modem router can be placed on a shelf or desktop.
Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
Figure 2-3 Wall-mount Install
