S-Registers
AT command set result codes
48
CONNECT 57600 EC
*
18 Connection at 57600 bps (DTE
rate)
CONNECT 115200 EC* 87 Connection at 115200 bps (DTE
rate)
CONNECT 32000 EC
*
70 Connection at 32000 bps (56K
mode) or V.90
CONNECT 34000 EC
*
71 Connection at 34000 bps (56K
mode)
CONNECT 36000 EC
*
72 Connection at 36000 bps (56K
mode) or V.90
CONNECT 38000 EC
*
73 Connection at 38000 bps (56K
mode)
CONNECT 40000 EC
*
74 Connection at 40000 bps (56K
mode) or V.90
CONNECT 42000 EC
*
75 Connection at 42000 bps (56K
mode)
CONNECT 44000 EC
*
76 Connection at 44000 bps (56K
mode) or V.90
CONNECT 46000 EC
*
77 Connection at 46000 bps (56K
mode)
CONNECT 48000 EC
*
78 Connection at 48000 bps (56K
mode) or V.90
CONNECT 50000 EC
*
79 Connection at 50000 bps (56K
mode)
Command Set Result Codes Table (Continued)
Result Code Numeric Description
* EC appears only when the Extended Result Codes configuration option is enabled. EC is replaced
by one of the following symbols, depending upon the error control method used:
V.42bis - V.42 error control and V.42bis data compression
V.42 - V.42 error control only
MNP 5 - MNP class 4 error control and MNP class 5 data compression
MNP 4 - MNP class 4 error control only
NoEC - No error control protocol
