15
Changing the setting in SS (synchro. scan) mode(1. 2)
• Shutter mode MANU, SS, E.TRG, AUTO
• Synchro. scanning setting
refer to the item "7.3 Synchro. Scan Operation".
MODE SS
SS OFF
OUT.P
OFF
SHUTTER
by pushing
MENU UP, DOWN
value by pushing
DATA UP, DOWN
• Partial scanning switchPART switch
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps
E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
(a) Changing the shutter speed setting
Move the “
” to SS by pushing [MENU UP], [MENU DOWN] buttons.
Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) Partial scanning setting
Move the “
” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons.
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
Move “
” to the current value by pushing [MENU UP], [MENU DOWN] buttons.
Select a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a characteristic of
CCD, and is not a symptom of malfunction.
120730c1_IK_TF7P2_EN.indd 15 12.7.30 1:19:01 PM
