The remote control
A simple at-a-glance reference of your remote control.
For On/Standby mode1
To select input from external sources2
Still Picture3
To call up text services in analogue mode 4
and interactive services in digital mode
To turn the subtitles On/Off5
Stereo/Bilingual transmissions6
Number buttons7
Switch the Audio Description On/Off8
No Function9
12
3
4
7
8
10
14
16
18
20
5
6
9
12
11
13
15
17
19
To alter the volume10
To change the programme11
In TV mode: To display on screen information12
In Text mode: To access the index page
To mute the sound13
To display the Quick access menu14
To exit menus15
To display the programme guide16
To return to the previous on-screen menu level17
To display the on-screen menu18
▲, ▼, ◄, ►: To move up, down, left or right 19
in the on-screen menu
OK: To conrm the selection
Colour button: Text control buttons 20
To reveal concealed text
To hold a wanted page
To enlarge the text display size
In normal picture mode: To
display clock on TV screen.
In Teletext mode: To toggle between
Telextext and normal picture mode.
Inserting batteries and
effective range of the
remote
Remove the back cover to reveal the battery
compartment and
make sure the
batteries are inserted
the right way round.
Suitable battery
types for this remote
are AAA, IEC R03
1.5V.
Do not combine a
used old battery with
a new one or mix battery types. Remove dead
batteries immediately to prevent acid from leaking
into the battery compartment. Dispose of them in
accordance with instructions on page 15 of this
manual. Warning: batteries must not be exposed
to excessive heat, left in bright sunlight, or put in
a re.
The performance of the remote control will
deteriorate beyond a range of about 5 metres, or
outside an angle of 30 degrees from the centre of
the television. If the range becomes reduced the
batteries may need replacing.
