Page 6
Empty the dust cup regularly
to maintain the efficient
performance of the cleaner.
The maximum dirt level is
marked on the Dust Cup.
You must empty the Dust
Cup before the dirt
reaches the MAX mark.
Failure to do this will impair
the efficiency of the cleaner.
Switch the cleaner off and unplug it.
Press the lid release down and lift the lid up
Carefully remove the
dust cup from the
cleaner.
Invert the dust cup over a
bin. Press the catch on
the lid which will pop
open. Shake and tap the
dust cup lightly to remove
as much dust as possible.
Close the lid. If you are
still vacuuming, replace
the cup.
Cleaning the Dust Cup Filters
The HEPA Filter stops nearly all dust particles and airborne
allergens from re-entering the air you breathe. Around the flter
there is a debris screen.
The HEPA Filter stops nearly all dust particles and airborne
allergens from re-entering the air you breathe. Around the flter
there is a debris screen.
Clean this filter and screen every time you use the cleaner.
Failure to do this will impair performance and may
damage the cleaner motor.
Open the Dust Cup as shown.
Clean this filter and screen every time you use the cleaner.
Failure to do this will impair performance and may
damage the cleaner motor.
Open the Dust Cup as shown.
Hold the tube at the top of the filter assembly. Rotate the tube to
the left (anti-clockwise) to unlock it.
Lift the filter assembly out.
Separate the debris screen from the filter.Wash the debris
screen under running water to free all particles.
Brush out the HEPA filter with a soft brush. If the filter is soiled,
wash it under running water until it is thoroughly clean.
Allow both parts of the filter to dry and then reassemble the
filter and re insert it into the Dust Cup.
NEVER replace a filter if it is damp.
VC109 Vacuum Cleaner User Guide
MAX
MAX
UNLOCK
LOCK
Emptying the Dust Cup and Cleaning the Dust Cup Filters
HEPA FILTER
DEBRIS SCREEN
