Frozen Button
Crumb Tray
Toast Timer Control
Reheat Button
Cancel Button/
Power Indicator
Carriage Lever
Toast Wells
Using Your Toaster
Your toaster can be used to toast a wide variety of bread. Fresh and
wholemeal breads take longer to toast, so these items will need to be
set at a higher setting than lighter types of bread. As personal preference
plays a great part, we suggest that you try dierent settings. Try the
lower settings rst, gradually increasing the timer setting until you nd
the right one for your circumstances.
Ensure that the mains socket is switched o at the wall and connect the
appliance cord to the wall socket. Now switch on the power.
Place the bread into the toaster bread wells. Set the timer control to the
desired setting. Press the carriage down gently until it latches. The power
indicator will light and the toasting cycle will commence. If the mains
power to the appliance is o, the carriage lever will not stay down.
When the bread has toasted, the carriage will ‘pop up’ and the toaster
will switch o. The toast can now be safely removed from the toaster.
If you have toasted small slices, you can remove these items more easily
by manually raising the carriage to its higher position.
At any time the toasting cycle can be stopped by pressing the CANCEL
button. The toast will pop up and the toaster will switch o.
Note: If you interrupt the toasting cycle, always use the CANCEL button.
Do NOT force the carriage lever up or you may damage the appliance.
Never attempt to remove bread while it is toasting. Press CANCEL rst.
Before Using Your Toaster
Place the toaster on a stable, level surface. If the connecting cord
is too long, carefully invert the toaster and wind the excess cable
round the cleats at the bottom of the unit. To lead the cable from
the toaster, press the cable into the recess at the centre rear of the
appliance.
Features and Controls Operation
Getting Started
