![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/d/ef/def17a0b-0190-4c0a-867e-986889e5cd8b/def17a0b-0190-4c0a-867e-986889e5cd8b-bg9.png)
7
FM RECEPTION STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset
Tune to the station you want to store as a preset.•
Press and • hold the PRESET button.
A preset number will be displayed ashing on the bottom line
of the display.
SELECTING A DAB STATION
The stations are stored in an alphanumeric list.
To select another station
Press the • or button to step up or down through
the station list.
The station name will be displayed with the multiplex name
and number.
Your radio can also receive FM band radio stations.
To change to the FM band
Press the • DAB/FM button.
To auto-tune to FM stations
Press and • hold the or button to search up or down
the band for the next station.
Searching...> will appear on the display and the radio will
start to search. Tuning will stop automatically when the next
station is reached.
To manually tune to FM stations
Press the • or button briey to tune up or down the
band in 50kHz steps.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between stereo
and mono FM reception (AUTO mode) or to receive in mono
only (MONO mode). Setting to mono mode may improve
sound quality in areas where a weak aerial signal results in
a high level of background noise.
To switch between FM AUTO and MONO modes
Whilst playing FM radio, press the• SELECT button to
change between auto and mono modes.
The legend ‘Auto’ or ‘Mono’ will be displayed to indicate which
mode is set.
Station list
Multiplex name and number
When you nd the station name you want to listen to, •
press the SELECT button.
After a short delay, the radio will tune to the station you •
selected.
To choose a dierent preset location to store your station, •
press the or button to nd your preferred preset
number, then press the SELECT button.
When you store a preset, the display will read ‘PRESET SAVED’
to conrm the number you selected.
NOTE: If you choose a preset number that is already in use the
new station details will over-write the stored station.
To recall a preset
Press the • PRESET button.
Press the • or button to nd the preset number you want.
When you nd the preset station you want, stop •
browsing the preset list and the radio will tune to the
selected station.
NOTE:- Your radio may have been pre-programmed with a
selection of DAB station presets. If so, these stations will be
listed on a label xed to the front panel.