6
LISTENING TO FM RADIO STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets for quick recall.
To store a station as a preset
Tune to the station you want to store as a preset.•
Press and • hold the MEM/ALARM button.
The Preset Store display will appear (P- followed by a ashing
number).
To listen to FM radio:
Press the • FUNC/C.ADJ button repeatedly to select FM
mode.
The radio will play and the display will show the tuned
frequency.
To auto-tune to FM stations
Press and • hold the SKIP+/TIME+ or SKIP-/TIME-
button to auto-tune up or down the band.
The radio will search in the direction indicated and the tuning
frequency will be displayed whilst searching.
When a usable station is detected the radio will stop tuning
and play the station.
To manually tune to FM stations
Press the • SKIP+/TIME+ or SKIP-/TIME- button briey
to tune the band in 50kHz steps.
STEREO/MONO RECEPTION
When receiving a strong, good quality, FM stereo signal your
radio will switch automatically to stereo reception.
The FM stereo symbol will be displayed.
When receiving weaker or FM mono signals, your radio will
switch to mono reception.
The FM stereo symbol will not be displayed.
SOUND SOURCES
You can choose to listen to the following sources -
FM radio•
iPod (when docked)•
Aux source (when connected via the rear panel AUX IN •
jack).
Selecting a source:
Press the • FUNC/C.ADJ button on the top panel repeatedly
to scroll through the available sources.
SELECTING A SOURCE
ADJUSTING THE VOLUME
To increase the volume:
Press the • VOL + button on the top of the unit.
To decrease the volume:
Press the • VOL - button on the top of the unit.
When the volume is adjusted, the display will change to show
the current volume level setting on a scale of 00 (minimum) to
30 (maximum).
In this example, the radio is ready to store preset number 3.
Press the • SKIP+/TIME+ or SKIP-/TIME- button if you
want to choose a dierent preset number to store the
station.
To store the preset, press the • MEM/ALARM button.
NOTE: If a preset is not stored within 5 seconds, the radio •
will revert to normal operation.
To recall any preset 1-10
Press the • MEM/ALARM button repeatedly to step
through the preset stations stored.
