26
The date and time can only be displayed by the camera in playback mode.
They cannot be printed.
The time settings are saved by an internal backup battery. Therefore, the time
settings are not lost when the two replaceable AAA batteries are removed.
The settings are not lost until the internal backup battery is flat.
5.14 Setting the LOGO
The LOGO is the startup image which is shown on the display when the camera is
activated. This allows the user to define individual images. To do so, proceed as follows:
1
Press the button to start playback mode. Open the required photo Press the
menu button and select the “Set Logo” item.
2
After setting the logo, select the option “Play Logo” in the playback mode menu.
There are two options:
• Enable: The image selected by the user is used as the startup image.
• Disable: The preset image is the startup image.
The startup image is not deleted when images are deleted or the memory is
formatted. To set another startup image, you must repeat the procedure
described above.
