ERROR CODES
Hob Status Codes Fault Description Action
H
Residual Heater
No Fault " H" will switch off when
glass surface drops below 60
o
C
Appliance Errors & Alarms Fault Description Action
F0 Touch Control Error
Switch the power off and on, The
system will reset and the hob
should now be working correctly
FA Touch Control Error
Switch the power off and on,The
system will reset and the hob
should now be working correctly
FU Touch Control Error
Switch the power off and on, The
system will reset and the hob
should now be working correctly
FJ Touch Control Error
Switch the power off and on, The
system will reset and the hob
should now be working correctly
FC Touch Control Error
Switch the power off and on, The
system will reset and the hob
should now be working correctly
Fr Touch Control Error
Switch the power off and on, The
system will reset and the hob
should now be working correctly
Fc or F
Overheat/Temperature Problems
Allow hob to cool then Switch the
power off and on, The system will
reset and the hob should now be
working correctly
FE
Overheat/Temperature Problems
Allow hob to cool then Switch the
power off and on, The system will
reset and the hob should now be
working correctly
Ft Overheat/Temperature Problems
Allow hob to cool then Switch the
power off and on, The system will
reset and the hob should now be
working correctly
FL Poor Ambient Light Conditions
Switch off lighting in area, Clean
hob surface, Switch the power off
and on, The system will reset and
the hob should now be working
correctly
If any of the above problems persist please contact the customer service department for further assistance,
Energy Saving Tips
• Always place cookware on the cooking zone before it is switched on.
• Whenever possible place lids on pans.
• Switch off the cook zones off before the end of the cooking time, taking advantage
of residual heat.
• The bottom of the cookware and the cooking zones should be the same size.
