Instruction Manual
29
Port Numbers
Port Numbers provides a table allow-
ing you to change TCP port values for
services available on the SV441DUSBI.
By default, they are factory-set to com-
mon Internet values. You may wish to
enhance security by disabling services
that you will not use with the unit. To dis-
able a service, change its port number
to 0. When you have made any neces-
sary changes, click Commit changes
to use the settings the next time the SV441DUSBI restarts. To force the
unit to restart immediately, click Restart Servers.
Help Menu
Provides a FAQ (Frequently Asked Questions) listing to assist you with
the features and operation of the SV441DUSBI.
Site Map Menu
This menu provides a directory of each setting available on the Web
configurator.
Copyright Menu
Provides the Terms of Use and other information related to the firmware
and software on the SV441DUSBI.
Using the Terminal Interface via Serial Port
The terminal interface can be accessed via the serial port for configura-
tion of the basic settings of the SV441DUSBI. While not intended to be a
substitute for the Web interface, it does allow you to configure some of the
same functions. The menu list below describes the options that can be
modified through the terminal interface.
Note that you must use the W option to confirm and apply any changes
made before you exit the terminal session.
