A SERVICE OF

logo

– 26 –
ENGLISH
Commands to Control Auto Cutter
Control codes
Hexadecimal
Function
codes
<ESC> “d” “0” 1B 64 30
<ESC> “d” <0> 1B 64 00
Full-cut command to the auto cutter
<ESC> “d” “1” 1B 64 31
Partial-cut command to the auto cutter
<ESC> “d” <1> 1B 64 01
<ESC> “d” “2” 1B 64 32
Feed paper to the cutting position and perform a full-cut.
<ESC> “d” <2> 1B 64 02
<ESC> “d” “3” 1B 64 33
<ESC> “d” <3> 1B 64 03
Feed paper to the cutting position and perform a partial-cut.
Other Commands
Control codes
Hexadecimal
Function
codes
<CAN> 18 Cancel last line & Initialize printer
<DC3> 13 Deselect printer
<DC1> 11 Set select mode
<RS> 1E Beep the buzzer
<ESC> “#N, n1 n2 n3 n4”
1B 23 N 2C n1 n2 n3 n4
Set memory switch
<LF> <NUL> 0A 00
<ESC> “@” 1B 40 Initialize printer
<ENQ> 05 Enquiry
<ESC> “?” <LF> <NUL> 1B 3F 0A 00 Reset printer hardware