25
Specifications
Specifications
Main Specifications
Image pickup device:
1/2type interline transfer PS CCD
Number of effective pixels:
782 (H) × 582 (V)
Cell size: 8.3 (H) × 8.3 (V) µm
Chip size: 8.10 mm (H) × 6.33 mm (V)
(
11
/32 (H) ×
1
/4 (V) inches)
Effective sensing area:
6.4 mm (H) × 4.8 mm (V)
(
9
/32 (H) ×
7
/32 (V) inches)
CCD horizontal driving frequency
29.5 MHz
CCD vertical driving frequency
31.25 kHz
Lens mount C-mount
Flange back 17.526 mm (
23
/32 inches)
Synchronization system
Internal/External (Selected
automatically)
External synchronization input/output
HD/VD (2 to 5 Vp-p)
* Automatically selected according
to the existence of an input
signal when the selection switch
on the rear panel has been set to
EXT.
External synchronization frequency
HD: 31.5 kHz
VD: 50 Hz (1N mode)
: 100 Hz (2I mode)
Allowable frequency deviation of external
synchronization
±1% (in horizontal synchronous
frequency)
Jitter Within 35 nsec
Scanning system
2 line simultaneous scanning
(2I mode)
1 line sequential scanning
(1N mode)
Horizontal resolution
600 TV lines
Sensitivity 400 lx F4 (
γ
correction OFF,
0 dB)
S/N ratio 58 dB
Minimum illumination
6 lx (Manual gain – Maximum
adjustment, F1.4,
γ
correction:
OFF)
GAIN Fixed/Manual (Can be selected
using the switch on the rear
panel)
Gamma compensation
OFF (Fixed only)
External trigger shutter
1/4 to 1/25,000 second
* Can be changed using the trigger
pulse width or set using the DIP
switches on the rear panel.
Power requirement
DC +12V (+10.5 V to 15 V)
Power consumption
4.0 W
Operating temperature
–5 °C to +45 °C (23 °F to 113 °F)
Storage temperature
–30 °C to +60 °C (–22 °F to 140 °F)
Performance assurance temperature
0 °C to +40 °C (32 °F to 104 °F)
Operating humidity
20 to 80 % (Non-condensing)
Storage humidity
20 to 95 % (Non-condensing)
Vibration resistance
10 G
(For 20 minutes in the X,Y and Z
directions at 20 to 200Hz)
Shock resistance 70 G
Outside dimensions
44 (W) × 33 (H) × 75 (D)mm
(1
3
/4 (W) × 1
5
/16 (H) × 3 (D) inches)
Weight 175 g (6 oz)
