59
To operate from the
remote control
To turn on the radio, press
RADIO ON/BAND•OFF for
more than 1 second (while the
tape is in stop mode only).
To select the band, press RADIO
ON/BAND•OFF for more than
1 second while the radio is on.
To tune in or recall a preset
station, press FF + or REW –.
To turn off the radio, press
RADIO ON/BAND•OFF.
Presetting Radio
Stations
You can preset up to 30
stations—20 for FM and 10 for
AM (for the JPn area*, up to 16
stations—8 for FM and 8 for
AM).
* Only if available. See “Receiving
Stations Outside Japan”.
Presetting Automatically
Scanned Stations
1 Press RADIO ON/BAND to
turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM or
FM.
3 Press and hold ENTER for
more than 3 seconds.
Preset number 1 will flash in
the display and the main unit
starts scanning the stations
from the lower frequencies
and stops for about 5 seconds
when a station is received.
4 If you wish to preset the
currently received station,
press ENTER while the preset
number is flashing.
The received station is preset
on preset number 1 and the
unit starts scanning for the
next receivable station.
5 Repeat step 4 until all
receivable stations are preset.
To stop scanning
Press RADIO OFF. The radio is
turned off at the same time.
Notes
•If stations are already stored, the
newly preset stations replace the
old ones when the above
procedure is completed.
•If stations cannot be preset
automatically, preset them
manually.
Presetting Stations
Manually
1 Press RADIO ON/BAND to
turn on the radio.
2 Press RADIO ON/BAND
repeatedly to select AM or
FM.
3 Press ENTER.
The frequency digits will flash
in the display.
