(3) Composite video on BNC connectors or Y/C video on 4 Pin DIN connectors
Unbalanced stereo line inputs on an RCA (Phono) connectors
(1) Component / Analog RGB on an HD-15 (VGA) connector
Unbalanced stereo line input on an RCA (Phono) connectors
(2) Component / Analog RGB on HD-15 (VGA) connectors
Unbalanced analog 5.1 surround line inputs on RCA (Phono) connectors
This device shall provide for connection of multiple audio and video output
devices without employing the use of an external interface. These connections
shall include the following:
(2) Balanced line outputs on XLR 3-pin connectors
(4) Unbalanced stereo line outputs on RCA (Phono) connectors
(4) 4-16 Ohm / 70V speaker outputs on screw type binding terminals
(1) Composite video on a BNC connector
(1) Y/C video on a 4-Pin DIN connector
(1) Component / Analog RGB on (5) BNC connectors
8.0 Power Requirements
This device shall accept power at 120, 220, or 230 VAC at either 50 or 60 Hz.
This device shall consume no more than 150 watts.
Power to this device shall be supplied via a detachable standard power cord that
is readily available for replacement from local suppliers.
9.0 Warranty Information
This device shall carry a 90-day labor and 1-year parts manufacturer’s warranty.
Authorized servicing dealers of the devices’ manufacturer shall perform warranty
service.
