18
To turn o the power
Turn the POWER switch to OFF (CHG).
Notes
If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p.
94).
It takes a few seconds for your camcorder to
be ready to shoot aer the power is turned on.
You cannot operate your camcorder during this
time.
In the default setting, the power turns o
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to
save battery power ([A.SHUT OFF], p.
67).
Tips
e date and time do not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p.
62).
Refer to page 88 for information concerning
“World time dierence.”
If the buttons on the touch panel do not
work correctly, adjust the touch panel
[CALIBRATION] (p.
93).
Changing the language setting
You can change the on-screen displays to
show messages in a specied language.
Touch (HOME) (SETTINGS)
[CLOCK/ LANG] [ LANGUAGE
SET], then select the desired language.
