60
100
e zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
Notes
Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
Tips
IRE represents the screen brightness level.
REMAINING SET
ON
Always displays the remaining media
capacity indicator.
AUTO
Displays the remaining recording time
of movies for about 8 seconds in the
following situations.
When your camcorder recognizes the
remaining media capacity when the
POWER switch is set to
(Movie)
When you press DISP/BATT INFO to
switch the indicator from o to on when
the POWER switch is set to
(Movie)
When you select the movie recording mode
on the HOME MENU
Notes
When the remaining recordable time for
movies is less than 5 minutes, the indicator
stays on the screen.
FLASH MODE
You can select the ash setting when you
record still images with the built-in ash
or an external ash (optional) that is
compatible with your camcorder.
AUTO
Automatically ashes when there is
insucient ambient light.
ON ( )
Always uses the ash regardless of the
surrounding brightness.
OFF ( )
Records without ash.
Notes
e recommended distance to the subject when
using the built-in ash is approximately 0.3 to
2.5 m (1 to 8 feet).
Remove any dust from the surface of the ash
before using it. Flash eect may be impaired if
heat discoloration or dust obscures the lamp.
e /CHG (charge) lamp ickers while
charging the ash, and remains lit when the
battery charge is complete.
If you use the ash in bright places such as
when shooting a backlit subject, the ash may
not be eective.
FLASH LEVEL
You can set this function when you use the
built-in ash, or an external ash (optional)
that is compatible you’re your camcorder.
HIGH (
)
Makes the ash level higher.
NORMAL ( )
LOW (
)
Makes the ash level lower.
REDEYE REDUC
You can set this function when you record
still images using the built-in ash or an
external ash (optional) that is compatible
with your camcorder.
When you set [REDEYE REDUC] to [ON],
then set [FLASH MODE] to [AUTO] or
[ON], appears. You can prevent redeye
by activating the pre-ash before the ash
ashes.
Notes
e redeye reduction may not produce the
desired eect due to individual dierences and
other conditions.
