10
Connecting the VCR
filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Notes
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is
recommended (see page 17). In the OFF position, only the signal from the aerial is output
through the AERIAL OUT connector.
• For a correct SmartLink connection, you will need a Scart cable which the 21 pins are
completely connected (for example a Sony cable reference VMC-2121HG). Please refer to
your TV’s instruction manual as well for this connection.
3
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional EURO-
AV cable.
This connection improves picture and
sound quality.Whenever you want to
watch the VCR picture, press
t
TV/
VIDEO to display the VIDEO
indicator in the display window.
4
Connect the mains lead to the mains.
You can now tune your TV to the VCR (see page 15).
