37Using the Menu
Chapter 1: Installation and Preparation
Memory Stick menu
The Memory Stick menu is used when you
are using a “Memory Stick”. The menu is
not displayed unless a “Memory Stick” is
installed in the Communication Terminal.
The menu appears when you select from
the menu tabs displayed by selecting
“Menu” in the launcher menu.
For details on the Memory Stick menu, see
pages 99 to 103 and page 112.
Setup menu
The Setup menu is used for participants in
the videoconference before or during the
conference.
The menu appears when you select from
the menu tabs displayed by selecting
“Menu” in the launcher menu or by pressing
the MENU button on the Remote
Commander.
For details on the Setup menu, see pages 73
and 74.
Setup menu (for the administrator)
The Setup menu for the administrator is used
to set various detailed items on the system.
The menu can be displayed by keeping the
MENU button on the Remote Commander
pressed.
You can also display the Setup menu for the
administrator by pressing the numeric button
9 on the Remote Commander twice while
the Setup menu (Initial Setup) or the screen
in communication is displayed.
For details on the Setup menu (for the
administrator), see pages 39 to 61.
Memory Stick
Auto
Multipoint Mode
Keep pressing the [MENU] button to show
more detailed setup menus.
Sound Priority
Video/Audio
Setup
Save Cancel
Note
Dial
Multipoint
General
ISDN
Information
Answer
Audio
Administrator
LAN
Status
Setup
Encryption via LAN SIP
