VAIO
®
Notebook Computer User Guide
82
To use the System Recovery CD(s)
1
Insert the Sony System Recovery CD in the DVD-ROM drive.
2
Shut down your computer as described in “Shutting Down Your
Computer” on page 14.
3
Wait four seconds and turn on your computer.
4
Click OK to signify you have read and accept the Microsoft End-User
License Agreement.
5
When the System Recovery menu appears, follow the on-screen
instructions to complete the recovery process.
If your computer does not start from the Recovery CD
1
Press the power button and hold it for more than four seconds to turn
off the computer.
2
Turn on the computer. When the Sony logo is displayed, press the F2
key. The BIOS setup menu screen appears.
3
Press the arrow keys to select the Exit menu.
4
Press the arrow keys to select “Get Default Values” and then press the
Enter key. The message “Load default configuration now?” appears.
5
Check that “Yes” is selected, then press the Enter key.
✍
You need to complete the Windows 98 registration process when you use the System
Recovery CD. Make sure you have the product ID number located on the cover of your
Microsoft Windows
®
98 Second Edition “Getting Started” manual. You will need this
number to complete the recovery process.
✍
The System recovery utility boots from the DVD-ROM drive. It must be in the DVD-ROM
drive when you turn on the computer.
✍
Your system may include one or two System Recovery CDs. If you have two System Recovery CDs,
insert the first CD to run the System Recovery program. You are prompted to insert the second CD
once the information from the first CD has been installed.
The recovery process takes from 30 to 60 minutes to complete.
