82
VOL +/– or
Digital Sound
Preset does not
function
• The “AUDIO OUT” parameter is set to “LINE OUT”.
, Set the “AUDIO OUT” parameter to “HeadPhone”(page 26).
The disc cannot
edit on other
component.
• The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4 stereo.
Momentary noise
is heard.
• Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
The group
function (group
mode/group skip
mode) does not
operate.
• While using a disc that has no group information, an attempt was
made to turn the group mode on (“No Group” appears).
, Use a disc with a group information.
• When selecting program play, an attempt was made to turn the
group mode on.
, Turn the group mode on, before selecting program play.
The display
window is not
normal.
• The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operation buttons.
Symptom Cause/Solution
