No colour on programmes
• Select “Reset” in the “Picture Adjustment” menu to return to the factory
settings (page 19).
No colour or irregular colour
when viewing a signal from the
Y, PB/CB, PR/CR jacks of
3
• Check the connection of the Y, PB/CB, PR/CR jacks of 3.
• Make sure that the Y, P
B/CB, PR/CR jacks of 3 are firmly seated in their
respective sockets.
Sound
Problem Cause/Remedy
No sound, but good picture
•Press 2 +/– or % (Mute).
• Check that “TV Speakers” is set to “on” in the “Features” menu (page 24).
Noisy sound
• See the “Picture noise” causes/remedies on page 36.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
• If no signal is received or no operation is performed in the TV mode for 10
minutes, the TV automatically switches to standby mode.
Some input sources cannot be
selected
• Select “AV Preset” in the “Set Up” menu and cancel “Skip” of the input
source (page 28).
The remote does not function
• Replace the batteries.
Wrong characters appear
when viewing the menu/Text
• Select “Language” and “Country” in the “Set Up” menu and set the
language and country/region in which Text is provided (page 26). For
Cyrillic languages, we recommended that you select Russia if your own
country/region does not appear in the list.
Problem Cause/Remedy
Continued
37
GB
Additional Information
