To watch VHF/UHF channels with an antenna
1 Press MENU.
2 Press t1"/_ to select _ (Channel), then press
GD.
3 Press tl,/_ to select "Cable," then press (Z).
4 Press tl,/_ to select "Oft," then press (2Z).
5 Perform steps 3 - 5 in "To perform Auto
Program again" above.
Note
You cannot receive and set the cable TV channels and VHF
UHF channels at the same time.
Tip
When you have a cable box or satellite receiver connected, the
Channel Fix feature is useful. For details, see page 37.
To skip channels
You can skip unnecessary channels when selecting
channels using the CH +/- buttons.
1 Press MENU.
2 Press t_/I_ to select _ (Channel), then press
GD.
3 Press t_/!_ to select "Channel Skip/Add," then
press @.
4 Press tl,/{ to select the channel you want to skip,
then press @.
Example: Select this to skip channel 5.
Tip
To scroll through the list, press and hold t,/_.
Press t_/_ to select "Skip," then press (Z).
If you want to re-enter the skipped channel,
select "Add."
Press MENU to exit the menu screen.
36
