87
Using the Menu
BOFF
Does not superimpose the date and time on
images.
ON
Superimposes the date and time on images.
z Tips
• When zebra or peaking is activated, the date and
time characters are affected by the signal, but
properly recorded on images.
BOFF
Cancels the melody.
ON
Activates a melody when you start/stop
recording, or when you are warned with
warning indicators, etc.
When you set this function to [OFF], you
can turn off the front camera recording
lamp. The default setting is [ON].
z Tips
• You can assign this function to an ASSIGN
button (p. 47).
When you set this function to [OFF], you
can turn off the rear camera recording lamp.
The default setting is [ON].
z Tips
• You can assign this function to an ASSIGN
button (p. 47).
When you set this function to [ON], you
can use the supplied Wireless Remote
Commander (p. 122). The default setting is
[ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another
remote control unit.
Displays the total hours of operation in 10-
hour increments.
See page 110.
DATE REC
BEEP
REC LAMP[F] (Recording lamp
[front])
REC LAMP[R] (Recording lamp
[rear])
REMOTE CONTROL
OPERATION TIME
CALIBRATION
