86
Changing Menu Settings
Chapter 7 Menus
Changing Menu Settings
This section explains how to change menu settings.
Buttons Used to Change Settings
Use the following buttons in the front panel to change the
menu settings.
Changing the Settings of BASIC
menu Items
The factory default setting is to display only the BASIC
menu items. To change the settings of BASIC menu items
proceed as follows.
1
Press the MENU button.
The menu selection level display appears on the
monitor screen.
In the figure below, SETUP MENU is selected (shown
in reverse video).
The time counter display of this unit shows only the
currently selected item. When the item name is long, it
is abbreviated.
2
With SETUP MENU selected in reverse video, press
the ,/B button.
This displays all BASIC menus on menu level 1.
3
Press the M or m button to select the required item.
Menu control
buttons
Functions
MENU button • Opens the menu and launches menu
control mode.
• Closes the menu and exits menu
control mode.
M and m
buttons
These buttons move the highlighted
cursor up and down within the current
level to select an item or setting.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
</A and ,/B
buttons
• Press the ,/B button to go down
one level.
• Press the </A button to go up one
level.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
RESET (NO)
button
• Returns the setting to the factory
default setting.
• Sends a negative response to
prompts on the monitor screen.
SET (YES)
button
• Saves the new setting in memory.
• Sends a positive response to prompts
on the monitor screen.
A B
MENU
RESET(NO)
SET(YES)
TC
PRESET
ASSIGN
2,4,5,6
1
8
9
3,5,7
Setup menu
SYSTEM MENU
SETUP MENU
AUTO FUNCTION
HOURS METER
Monitor screen
Time counter display
Menu selection level display
Operational
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
SETUP BANK OPERATION
SYSTEM SEL : J
MENU GRADE : BASIC
Monitor screen
Time counter display
Level-1 menu display
