9
HDC-X300 HDC-X310
General
Power requirements DC 12 V
Power consumption 18 W (camera head only) 19 W (camera head only)
23.5 W (with the VCL-719BXS, 24.5 W (with the VCL-719BXS,
HKC-SV1 Filter Servo Unit, and HKC-SV1 Filter Servo Unit, and
the RM-B750 Remote Control Unit the RM-B750 Remote Control
connected) Unit connected)
Operating temperature +14 to +113 °F (-10 to +45 °C)
Storage temperature -4 to +140 °F (-20 to +60 °C)
Weight Approx. 2 lb 10 oz (1.2 kg) Approx. 2 lb 13 oz (1.3 kg)
(camera head only) (camera head only)
Approx. 3 lb 11 oz (1.7 kg) Approx. 3 lb 15 oz (1.8 kg)
(including camera head, (including camera head,
tally unit) tally unit)
Camera
Pickup device 3-chip 1/2-inch type 1.5-megapixel CCD
Effective picture elements (H x V) 1440 x 1080
Optical system F1.4 prism system
Built-in filters 1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND
Lens mount Sony 1/2-inch bayonet mount
Signal system 1080/59.94i, 1080/50i
Scanning system 59.94i/23.976PsF/29.97PsF selectable at 59.94i
50i/25PsF selectable at 50i
Sync system Internal and External (3 state/VBS (BB))
Sensitivity
(2000 lx, 89.9% reflectance)
F10 (typical)
Minimum illumination 0.003 lx (F1.4, +48 dB gain, with slow shutter mode at 64 frame
accumulation)
Gain selection -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB
Shutter speed 1/60 (50i mode), 1/100, 1/250, 1/500, 1/1000, 1/2000 s
Slow shutter 2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frame
Clear scan 50 to 200 Hz (50i mode), 60 to 200 Hz (59.94i mode)
Smear level -120 dB (typical)
S/N ratio 52 dB (typical)
Geometric distortion Below measurable level (without lens)
Modulation depth at 21 MHz 40% (typical) (with HD SDI output)
Signal inputs
Genlock video BNC type (1), 3-level/2-level (VBS, VS)
Trigger BNC type (1), TTL level
Signal outputs
HD SDI BNC type (1), 0.8 Vp-p ±10%, 75 Ω -
Video HD D-sub 15-pin (1)
Y/Pr/Pb: 1.0 Vp-p, 75 Ω
R/G/B: 1.0 Vp-p, 75 Ω
HD/VD: TTL level (3 Vp-p)
Sync: 0.6 Vp-p, 75 Ω
Tally Mini-jack (1)
Other inputs/outputs
OFC - Single mode, LC optical
connectors (2)
Remote 8-pin (1)
Lens 14-pin (1)
DC input DC jack (1)
VCL-719BXS (supplied with the HDC-X300K/X310K)
Focal length 6.7 to 127 mm
Zoom Manual or power selectable
Zoom ratio x19
Maximum aperture 1:1.6, 1:2.1 (at telephoto end)
Aperture Manual or automatic selectable
Focusing range Infinity to 5 cm
Filter attachment threads 82 mm dia. 0.75 mm pitch
Mounting Sony 1/2-inch bayonet mount
Weight 2 lb 13 oz (1.34 kg) including lens food
Supplied accessories
Operation manual (1), AC adaptor (1), AC cable (1), Tally unit (1),
Number plate (1), Lens mount cap (1),
VCL-719BXS focus servo lens (1, HDC-X300K/X310K only)
HFU-X310
General
Power requirements AC 100 to 240 V, 50/60 Hz
Current consumption Max. 0.6 A
Operating temperature +41 to +104 °F (+5 to +40 °C)
Storage temperature -4 to +140 °F (-20 to +60 °C)
Maximum cable length Optical fiber cable (single mode): 3280 feet (1000 m)
Dimensions (W x H x D) 7 7/8 x 3 1/2 x 8 1/2 inches (200 x 88 x 215 mm) without projection
Weight Approx. 4 lb 6 oz (2 kg)
Signal inputs/outputs
Remote 8-pin (1)
Genlock BNC type (2), 3-level/2-level (VBS, VS)
Sync block 0.3 Vp-p (when terminated), 75 Ω, loop-through
HD SDI input* BNC type (1) Conforming to SMPTE 292M
OFC Single mode, LC connectors (2), send/receive
Multi-connector 6-pin (1)
AC input 3-pin (1)
Supplied accessories
Operation manual (1), OFC cover (1), M3 x 4 screws (2),
M4 x 4 screws (1), Multi-connector plug (1)
* Requires upgrading
Dimensions
HDC-X300
HDC-X310
