
18
Step 4: Inserting a cassette tape or a “Memory
Stick Duo”
You can use mini DV cassettes only
(p. 76).
1 Slide EJECT lever in the direction
of the arrow.
The cassette compartment automatically
comes out and opens up.
2 Insert a cassette tape with its
window facing up.
Push the center of the back of the
cassette tape lightly.
3 Close the cassette compartment
lid by pressing (PUSH) mark.
The cassette compartment automatically
slides back in.
b Notes
• Do not insert your fingers or touch the inside of
the cassette compartment when it is open. It may
cause a malfunction.
• If you touch any part of the VCR other than the
(PUSH) mark when closing the cassette
compartment, the cassette compartment may not
be closed properly.
• Do not close the cassette compartment until it
opens completely. It may cause a malfunction.
z Tips
• The recordable time varies depending on [DV
REC MODE] (p. 55).
To eject the cassette tape
Open the cassette compartment following
the same procedure as described in step 1
and remove the cassette tape.
You can use a “Memory Stick Duo”
marked with or
only (p. 77).
Cassette tape
EJECT lever
Window
Cassette
compartment
“Memory Stick Duo”
(PUSH) mark