74 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
3 Access advanced menu page 13.
a) An asterisk (*) appears in front of any factory
preset file whose contents have been revised
at least once.
4 Move the cursor to DESTINATION FILE and
repeatedly press the UP/ON button or the DOWN/
OFF button to select USER1, USER2, or USER3.
5 Press the UP/ON button to move the cursor to
STORE FILE?.
The display changes as shown below.
6 Press the UP/ON button to store the file. To abort
the save operation, press the DOWN/OFF button
(the display returns to the one shown at step 4).
When the save operation is finished, the display
changes as shown below.
To save setup files to a tape (when using
the DSR-1/1P)
Connect the DSR-1/1P to the camera head and load the
tape onto which the file will be recorded.
1 Perform steps 1 to 4 of “Saving File Settings” and
select TAPE as the file saving destination.
2 Press the UP/ON button to move the cursor to
STORE FILE?.
The display changes as shown below.
Currently
selected file
a)
File in which
current settings
are to be stored
Setup Files
